NEW Trane Electric Unit Heater 7.5 kW, entryway UHEC
0733 USD
7 Available NEW UNITS
Buy from us and save $548
PLUS
get a more expensive brand TRANE that is made in the USA
(shipping wt 50#)
PLUS
The Wall Mounting Bracket is included!!
Plus
6.85% SALES TAX IS ONLY ADDED IF SOLD IN ILLINOIS
Selection Procedure
Calculate the heating loads using the NEMA, ASHRAE, or other accepted heating load calculation method. Determine the quantity and size of unit heaters to be used. To maintain uniform temperature and recommended air circulation, it is suggested that cfm should be adequate to accomplish three air changes per hour. For maximum comfort, the use of smaller units with lower airflow is suggested to provide more uniform temperature and even airflow. In warehouses and storage areas where uniform heat distribution and temperature control is of lesser importance, it is desirable to use fewer units with greater capacity.
Unit heaters mounted in the horizontal discharge position are most effective when heat is directed along the perimeter of the building wall with the airflow of each unit supporting the airflow of the other units to create a constant flow of warm air.
Unit heaters in the vertical position are ideal for use in high ceiling areas and areas where low mounting heights would interfere with personnel or equipment activity. Units mounted in the vertical discharge position should not be mounted higher than the unit's published maximum mounting height ratings.
When unit heaters are used to temper areas such as loading dock doors, one or more units should be arranged to blanket the exposed opening.
388 visits