QR Code Link to This Post This is a working Ritter Midmark M9 UltravClave Autoclave. I managed a medical center for over a decade and we used this unit there, it works well and you can test it in person. It heats up perfectly and works great, we had regulations inspectors check it every year and it can be tested out in person. Located in West Chester, PA. I was the original and only owner, it was in use for 8 years, though it was used twice a month usually. It had maintenance done on it by the same medical equipment company that sold us everything, and they always said it was running properly and heated up well. Mid 2016 a state inspector for Medical offices checked it out with a spore test and said it worked properly, but I do not have any documentation from that building/practice anymore. The only issue at all is that occasionally when first plugged in there is an "E001" Error Message that appears until any button is pushed, and the technicians that regularly checked it stated that it was the water fill level detector was not initially detecting the water amount, it was not leaking, having condensation or a circuit board issue. Once the machine is started or any button is pushed, the error goes away and does not return unless the machine is unlugged. Any reputable seller online generally sells this unit for $2200 and over, more like $2500. Most people sell these untested and broken for parts around $850 to $1000.. This unit actually has all 4 Trays intact and in great condition, most of these sold only have one tray or two at most. These trays are $50 a piece. I will also include a box of crosstex sterilization pouches, normally $40. The price is $1300 cash, must pick up from West Chester PA. This is a heavy unit, I can help you load it if needed. Serious offers only, would be great for tatoo artists, dentists or general practitioner office. Great price for an actual working unit. I have many other medical items, supplies and equipment available, check my other posts or just.
78 visits